Beginner
How Hot Should a Pan Be for Steak?
A pan for steak should reach about 400°F to 500°F before the steak goes in. Learn how to check the heat, pick oil and adjust for thick cuts.
A gray, steamed steak usually traces back to a pan that was not hot enough when the meat went in, not to the cut. A heavy pan wants a surface of about 400°F to 500°F, and the stove dial is a poor guide to that number.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.
What temperature does the pan need?
Aim for a surface between about 400°F and 500°F (204°C to 260°C). In that range the outside browns fast through the Maillard reaction, the browning that builds the crust's flavor, while the inside stays at your target doneness. Below it, the steak releases moisture and steams instead of searing; well above it, the outside burns before the center catches up.
Moisture on the meat works against the sear too, because it turns to steam, cools the pan and drags out the cooking. Pat the steak dry before it goes in.
Which pan holds that heat?
A heavy pan keeps its heat when cold meat lands on it, which is the whole point. Cast iron is widely seen as the top choice for searing because of its heat retention and even heat. A thick, multi-clad stainless steel pan is another viable option, one that heats faster and responds more quickly to adjustments, though it needs a thorough preheat.
The best pan to cook steak on stove covers the heat retention and materials behind this range. Coated pans have a maximum temperature set by the maker, so follow the maker's instructions before preheating one empty.
How do you know the pan is ready?
Surface temperature is hard to judge by eye, so cooks lean on a few signs. Preheating usually takes five minutes or more over medium-high heat, and a heavy cast iron pan takes longer.
- Water drops: flick a few onto the empty pan; they should sizzle and evaporate at once.
- Oil: it should shimmer and just begin to wisp smoke as the steak goes in.
- Infrared thermometer: pointed at the surface, it reads the pan directly instead of guessing.
Which fat belongs in a hot pan?
Use a neutral oil with a high smoke point for the sear, such as avocado, grapeseed or refined canola. Olive oil has a lower smoke point and can burn at searing heat. Butter scorches at that heat as well, so it belongs in the final minute, where it bastes the steak and flavors the crust.
When should the heat come down?
Once a deep, golden-brown crust has formed on both sides, drop the heat to medium to finish the center. Staying at maximum leaves a charred outside and an underdone middle.
A very thick steak, over 1½ inches, needs a lower pan temperature from the start, or a reverse sear, where the steak warms in a low oven first and then meets the hot pan. After the crust, doneness decides how long the steak stays on the heat, and pan steak doneness timing sets out the minutes and pull temperatures.
Frequently asked
Why is my steak sticking to the pan?
A steak sticks when it is moved before the crust has formed. If it resists, leave it another 30 to 60 seconds, since it releases on its own once the crust sets. A steak that sticks every time points to a pan that was too cool when the meat went in.
How do I keep smoke down when searing?
Turn the exhaust fan to its highest setting, open a window and clear the area before lighting the burner. A dry steak and a high-smoke-point oil cut the smoke, but searing heat still makes some, so plan for it.