How-to

How to Use a Silicone Basket in an Air Fryer

Learn how to use a silicone basket in an air fryer: sizing, preheating, loading, shaking, lifting it out hot and cleaning, step by step.

A silicone basket does not replace the air fryer's own basket; it sits inside it, and that one fact changes how you load it, shake it and lift it out. The cooking is easy. The details that go wrong are fit, order and handling a pot that comes out far hotter than the drawer around it.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

Check the fit before the first use

The basket lies flat on the bottom of the fryer basket, so its width decides everything. Measure the inside of the fryer basket and pick a size slightly narrower, so it sits flat instead of creasing against the walls. An oversized basket can ride up toward the heating element above it, which risks smoke, a melted rim and a nasty smell.

See our recommendations on which silicone air fryer basket to buy for the size ranges that suit common air fryer baskets.

A new basket should be washed in warm soapy water, rinsed well and dried completely before it goes in. Leftover water or residue gets in the way of crisp results.

Seven steps from box to first batch

Order matters more than any single setting here. The basket goes in after preheating, not during it, and the food goes in only once the basket sits in place, because lifting a loaded silicone basket into position is awkward and messy.

  1. Wash, rinse and fully dry a new basket.
  2. Preheat the air fryer empty, following its manual for time and temperature.
  3. Lay the basket flat on the bottom of the fryer basket.
  4. Add the food in a single layer and leave room to shake it.
  5. Set the time and temperature the recipe calls for, then check early, since times can shift slightly.
  6. Shake the outer basket, or flip the food halfway, for even browning.
  7. Let the basket cool a little, then lift it out by both handles with mitts.

Handle the hot basket with mitts and tongs

A silicone basket heats up along with the air around it, and its handles are small because the design cannot rise above the fryer basket without nearing the heating element. Oven mitts are the safe way to lift it, holding both handles so the contents do not tip. Silicone-tipped tongs help twice over, since they flip food without scratching anything and let you lift pieces out without handling the hot basket at all.

Shaking works differently here. Shaking the outer basket moves the food inside the liner only a little, so thin items such as fries may need a turn with tongs, and how well silicone liners perform at crisping depends on whether the base has raised ridges for air to pass under the food. Overfilling makes all of this harder, because a full basket leaves no room to move the food at all.

Clean it, store it and keep it intact

Let the basket cool before washing. Warm soapy water is enough for most grease, and a short soak loosens stubborn bits before a gentle scrub. Skip abrasive scrubbers, which can scuff the surface. Many baskets are dishwasher safe, but the maker's instructions settle it, so check before loading one.

Sharp utensils can cut or puncture silicone, so use tongs or spatulas with silicone or wooden tips. For storage, lay the basket flat or hang it by a handle, and keep heavy items off it so the shape does not warp.

Frequently asked

What is the use of a silicon basket in an air fryer?

It works as a reusable pot that sits inside the fryer basket and catches grease, crumbs and drips, so the fryer basket's own non-stick coating touches less food and cleanup mostly means lifting the silicone basket out and washing it.

What is the best thing to put on the bottom of an air fryer?

It depends on the food, but a silicone basket is sturdier than foil trays or paper liners, which are light and hold little food, so they are harder to shake and flip. Whatever goes in should lie flat and stay well clear of the heating element.