Beginner
How to Use a Meat Grinder
How to use a meat grinder: chill the meat, assemble the parts, pick a plate and grind without smearing or clogs. Steps, plate sizes and fixes.
Most grinder problems start before the switch is flipped. Warm meat smears into a paste, tendons wrap around the blade, and a plate chosen at random gives burgers the texture of pâté. The machine itself is simple, a screw that pushes cold meat against a blade and plate, so the results come down to preparation, assembly order and pace.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.
Chill the meat and the parts before anything else
Cold is what keeps the fat in distinct flecks instead of smeared across the blade. Cut the meat into strips or cubes small enough to fit the feed tube, trimming silver skin, tendons and gristle as you go, since those wrap around the blade and clog the plate. Then firm the pieces up in the freezer for roughly half an hour to an hour. The target is very cold and stiff, never frozen solid.
The metal parts benefit from the same treatment: grinding head, auger, blade and plate can sit in the freezer for about 30 minutes too. Lean game such as venison usually needs fat added to grind into good burgers or sausage. Chill that fat separately, cut it small, and aim for roughly 20 to 30 percent fat in the finished mix, a common target for burgers.
Six steps to assemble the grinder
Always follow the maker's manual, because designs differ slightly, but most grinders go together in the same order. Set the machine on a flat, non-slip surface (or clamp a manual one down) before starting.
- Slide the auger into the housing with the screw end facing out.
- Place the cutting blade on the end of the auger with the flat side facing outward.
- Seat the grinding plate against the blade, lining up any notch with the housing.
- Screw on the retaining ring until snug, without over-tightening.
- Fit the feed tray or hopper on top.
- Put a large bowl under the outlet to catch the meat.
Which grinding plate gives which texture?
The plate decides the final texture, and a coarser plate also puts less strain on the motor. Hole sizes vary between brands, so compare the plates that came with the machine rather than relying on a millimeter chart. For models that ship with several plates and stuffing tubes, see the best meat grinder for venison.
| Plate | Texture | Best for |
|---|
| Fine | Smooth, tight | Pâtés, fine sausages |
| Medium | General purpose | Burgers, meatloaf |
| Coarse | Chunky | Chili, rustic sausages |
Six steps from first handful to seasoned meat
The pace matters more than the speed. A steady feed lets the auger do the work, while stuffing the tube makes the motor labor and warms the meat.
- Switch the grinder on before feeding it, or start turning the crank on a manual model.
- Drop a few chilled pieces into the tray at a time.
- Guide them down with the pusher, never with fingers.
- Let the machine work through each handful without forcing it.
- For a finer texture, run the meat through again using a finer plate.
- Mix in salt, pepper and other seasonings gently, so the texture stays loose.
What to do when the grinder smears or clogs
Two causes account for most trouble. Smearing means the meat was not cold enough, so chill it longer. Clogging means the meat is going in too fast or still carries connective tissue, so cut smaller pieces and remove the gristle. Several electric models, including the Aiheal Electric Meat Grinder and the AAOBOSI #12 Heavy Duty Meat Grinder, have a reverse function for clearing jams.
Two habits matter for safety: keep hands clear of the moving parts, and unplug the machine before taking it apart. Once the last batch is out, cleaning your meat grinder while the residue is still soft takes far less scrubbing than waiting.
Frequently asked
Can I grind bones in my meat grinder?
Not in a standard grinder, since bones damage the plate and blade and create a safety hazard. Product listings spell it out: the LEM BigBite Meat Grinder is described as not for bones, while the Stx International Turboforce II Meat Grinder is listed as handling soft bones such as chicken, rabbit, squirrel and quail. Check the maker's statement for any machine before trying.
Can I grind frozen meat?
Fully frozen meat is a poor idea, because it jams the auger and strains the motor. The meat should be very cold and firm but not frozen solid, which is why a short stint in the freezer works better than a long one.
How long does ground meat last?
Freshly ground meat is best used within a day or two, kept in the refrigerator in an airtight container. For longer storage, divide it into portions, label them with the date and freeze them.