How-to
How to Use a Bacon Press
How to use a bacon press: when to preheat it, how long to press each side, and how to clean it so bacon cooks flat and crisp.
Most bacon curls because only part of each strip touches the pan, so some sections stay chewy while the edges overcook. A press fixes that with weight, but the results depend on a few choices: whether to heat the press first, when to lift it, and which foods besides bacon it suits. The steps are short once those choices are clear.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.
Does the press need to be preheated?
It depends on the job. A press at room temperature simply holds food flat, which gives more control over how fast it cooks. A press heated in the pan sears the top of the food while the pan sears the bottom, so both sides brown at once. For bacon, many cooks warm the press on the skillet for a minute or two, then move it aside while the first strips start to render.
A cast iron press should be seasoned as its maker directs before first use, and other metals need only a wash. The material also affects weight, handle comfort and coverage. See our recommendations on which bacon press to buy for how weight, handle and size compare. Whatever the material, avoid very light presses, since the weight is what keeps the strips from shriveling.
Seven steps to flat bacon
This method works in a cast iron or stainless skillet on the stovetop. Keep a heat-proof resting spot, such as a trivet, within reach of the stove.
- Set the skillet over low to medium heat and lay the press flat in it for a minute or two if you want it hot.
- Move the press to the trivet, using a mitt or towel on the handle.
- Lay the bacon strips in the pan without overlapping them.
- Turn each strip once the fat begins to render out.
- Set the press on the strips for 30 to 60 seconds, lift it, flip the bacon and press again for another 30 to 60 seconds.
- Keep flipping, with the press set aside, until the bacon reaches the doneness you like and stops trying to shrivel.
- Lift the strips onto a plate lined with paper towels to drain.
What else the press is good for
The press is only a flat, weighted plate, so it helps any food that cooks better in full contact with the pan. The same weight that flattens bacon works well in these jobs.
- Steaks and fish fillets: a press keeps them from curling and builds an even crust.
- Smash burgers: firm pressure early in the cook creates the browned crust.
- Grilled cheese and panini: the weight toasts the bread evenly.
- Tortillas: the press stops the edges from curling up.
- Sausages and veggies: pressing keeps them in contact with the hot surface.
Mistakes that spoil the result
A few habits cause most of the trouble with a press, and each is easy to avoid.
- Grabbing a hot handle: the handle warms up while the plate preheats, so use a mitt or towel.
- Pressing at an angle: uneven pressure gives lopsided food and can send juices squirting out of the pan.
- Crowding the pan: overlapping strips cook unevenly, so work in batches.
- Using a lightweight press: thin or hollow plates do not hold the food flat.
- Scratching a nonstick surface: follow the pan maker's instructions before using a metal press on one.
Keeping the press in good shape
Let the press cool completely before cleaning it. Most cast iron presses are wiped clean rather than soaked, and detergent can encourage rust over time, so check the maker's care instructions. If something is stuck on, a little kosher salt rubbed on with a clean towel lifts it off. A seasoned press is easy to maintain, and other metals only need to be kept clean.