How-to

How to Clean an Electric Kettle

How to clean an electric kettle inside and out: a monthly vinegar soak, acid alternatives, safe exterior wiping and what never to get wet.

The chalky crust on the bottom of an electric kettle is mineral scale left behind each time the water boils away, and it builds up long before the kettle looks dirty. Left alone, it dulls the taste of tea and coffee and slows the boil. Keeping a kettle clean is really two jobs: a regular acid soak for the inside, and a damp wipe for the outside that keeps water away from the electronics.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

How often does a kettle need cleaning?

Plan on a full inside clean about once a month, or on the schedule in the maker's instructions. Hard water leaves more mineral deposits, so homes with it need the soak more often, while a kettle that sits unused for weeks can wait longer.

Emptying and rinsing the kettle after use, then leaving it open to dry, puts off the worst of the buildup, and wiping the outside takes seconds. Thick scale in hard-water homes is a job for kettle descale maintenance, which goes further than this routine.

Six steps to clean the inside with vinegar

Small travel kettles make this job quick, but the opening matters: a mouth wide enough for a hand, such as the 4-inch one on the RHD Small Portable Electric Kettle 0.5L, lets a sponge reach the base. See our recommendations on which portable electric kettle to buy for opening width, removable cords and other details that ease cleaning. Check the maker's instructions before using vinegar, since not every kettle suits acid.

  1. Empty the kettle and let it cool, then lift out any spout filter and rinse it under the tap.
  2. Fill the kettle partway with equal parts white vinegar and water, keeping the level below its maximum fill line.
  3. Heat the mixture to a boil, then switch the kettle off.
  4. Leave it to sit for about 20 minutes, and let stubborn buildup soak longer.
  5. Pour it out, rinse several times with fresh water, and wipe the inside with a soft sponge or cloth.
  6. Boil fresh water once and discard it, repeating if any vinegar smell lingers.

What can replace vinegar inside the kettle?

Vinegar is not the only acid that loosens scale. Each alternative below follows the same soak and rinse as above, with its own trade-off.

How to clean the outside without wetting the electronics

Wipe the outside every so often, and right away after sauce or grease splatters. Dip a cloth in warm water with a little dish soap, wring it until it is only damp, wipe the body, then go over it again with a cloth dipped in clean water and dry it with a soft towel. On models with a removable cord, detach it first and keep the base dry. Stainless steel exteriors take a shine from a soft cloth lightly touched with olive oil and buffed along the grain.

The heating parts are what set an electric kettle apart from a stovetop one, so a few things stay off limits.