Beginner

Built-In Microwave Dimensions

Built-in microwave dimensions explained: usual widths, why the cutout beats the body size, clearance gaps and how to measure the opening.

A built-in microwave that is about 24 inches wide needs a cutout wider than that, because the opening also has to hold the trim kit and leave room for air. Three numbers decide the fit: the body size, the cutout size and the clearance around the unit. Width follows standard cabinet sizes, while depth and height vary more from model to model.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

Built-in widths follow cabinet sizes

Built-in microwaves are made to match cabinetry, so their width classes are 24, 27 or 30 inches. Other microwave types follow their own habits, which matters if a built-in is being weighed against another style.

TypeUsual width
Built-in24, 27 or 30 inches
Over-the-range30 inches, 24 for compact
Microwave drawer24 or 30 inches
CountertopRoughly 15 to 25 inches, by model

The cutout is the number that decides fit

A body width in the 23 to 30 inch range is only half the story. The cabinet cutout has to be larger than the body to take the trim kit and the clearances, so compare the opening with the cutout the maker publishes rather than with the width of the microwave itself.

Real listings show the gap. The Frigidaire Gallery Built-in Microwave 2.2 Cu Ft lists a body 24 7/16 inches wide, 19 5/8 deep and 13 5/8 high, against a cutout 24 3/4 wide, 20 deep and 16 3/4 high, with the trim kit sold separately. The Summit Appliance 24 Inch Built-in Microwave lists a cutout of 22 1/2 inches wide, 15 3/4 high and 18 1/4 deep and ships with its own trim kit, which is designed for 24 inch cabinet openings. A cabinet opening and a cutout can be two different measurements, so check which one a listing quotes.

For models with published cutout sizes and trim kit options, see the built in microwave comparison with trim kit.

A 12-inch microwave can need a 15-inch gap

Ventilation space is part of the size. A microwave that measures 12 inches tall but needs 3 inches of clearance above it needs a 15-inch gap, and that missed allowance is a frequent reason a unit of the right size still does not fit. The exact clearances belong to each model, so use the maker's installation instructions rather than a rule of thumb.

The frame and its ducts are what keep air moving once the unit is enclosed, and they are covered in trim kit basics for microwaves.

Five steps to measure the opening

Measure the empty cabinet space, or take out the old unit first if one is being replaced. A replacement is not a guarantee of a match: an opening or trim kit sized for the old model may not suit the new one, so compare the new model's published cutout and the trim kit part number the maker names.

  1. Measure the cutout width from cabinet to cabinet at its narrowest point, since trim and face frames take up width.
  2. Measure the cutout height from the top of the opening to the bottom.
  3. Measure the depth from the wall to the front of the cabinet, excluding the door.
  4. Read the installation sheet for any extra clearance above, beside or behind the unit.
  5. Compare all three numbers with the model's published cutout, not with its body size.

Frequently asked

How much space does the open door need?

Typical built-in depths run roughly 20 to 25 inches with the door closed and 30 to 35 inches with it open, and individual models can run past that. Many built-ins have a drop-down door, so the open-door figure is how far the unit reaches into the room; leave that much clear space in front of the cabinet.

How tall is a built-in microwave?

Height varies by model more than width does. Typical ranges run from the mid-teens to the low twenties in inches, and some bodies are shorter, such as the Frigidaire Gallery at 13 5/8 inches. Go by the cutout height in the model's own specifications, since the cutout is taller than the body.