Beginner

Baking Pan Sizes Chart

Baking pan sizes chart with dimensions and cup volumes for round, square, loaf and jelly roll pans, plus how to swap pans and scale a recipe.

Cake pans are sold by width, but what decides whether a batter fits is volume, and two pans that look nothing alike can hold the same amount. A 9-inch round, an 8-inch square and a 9x5 loaf pan each hold about 8 cups, which is why a recipe written for one of them usually works in another with a small change to the bake.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

How much each common pan holds

The chart lists the full volume of the pans most recipes call for, measured with batter to the very rim. Batter never goes in that far, so these figures are a ceiling for matching pans, not a fill line.

PanSizeFull volume (cups)
Round9 x 2 inches8
Square8 x 2 inches8
Square9 x 2 inches10
Rectangle9 x 13 inches14 to 16
Loaf9 x 5 inches8
Jelly roll10 x 15 inches10

Which pans can stand in for each other

Pans with the same full volume take the same amount of batter, so grouping them by volume shows the easy swaps. A 9x13 pan also equals about two 9-inch rounds. Pans sold in different materials and coatings still follow these volumes; for what those pans are made of, see the baking pans non toxic comparison.

Fill the pan about half to two-thirds, then watch the oven

A recipe that moves to a different pan should still leave the batter well below the rim: about half to two-thirds full gives it room to rise, and three-quarters is the most any pan should take. Too little batter bakes thin and dry, and too much sinks or overflows.

Same volume does not mean same bake. A loaf pan is more compact than a round or square pan and needs longer, so begin checking for doneness early and trust a cake tester over the timer. When a smaller pan leaves the batter deeper than the recipe intended, a slightly lower oven temperature with a longer bake lets the center cook before the edges overdo.

Five steps to scale a recipe for a pan not on the chart

When no pan on the chart matches, work from surface area. A 9x13 pan is 117 square inches and a 9-inch round is about 63.5, which is why one 9x13 batch fits two 9-inch rounds. Going from a 9-inch round to a 10-inch round (about 78.5) calls for roughly a quarter more batter. Weighing ingredients makes the scaling easier than measuring by volume, since halving 1/3 cup by hand is awkward.

  1. Find the area of the pan the recipe calls for: length times width for a square or rectangle, 3.14 times the radius squared for a round pan.
  2. Find the area of the pan you have the same way.
  3. Divide your pan's area by the recipe pan's area to get the conversion factor; above 1 scales the recipe up, below 1 scales it down.
  4. Multiply the amount of every ingredient by that factor.
  5. Check that the batter stays under two-thirds of the pan's depth, and bake until a cake tester comes out clean.

Three cakes that should stay in their own pans

Swaps work for everyday cake and brownie batters. Batters developed for a specialty pan generally stay in it.

Frequently asked

How many cupcakes will a typical 9x13 cake recipe make?

A 9x13 cake recipe should make about 24 regular cupcakes. The bake time drops well below the cake's, so start checking early; depending on how dense the batter is, around 15 minutes in a 350°F oven is typical.

How can a pan's volume be measured at home?

Fill the empty pan with water one cup at a time and count until it is full. That count is the full volume, the same measure the chart above uses.